SmartDVB Latest

[mach1]

SmartDVB 0.4.0

Quote:
Fixed:
Scanner update would mark MIS entries with other ID incorrectly lost
RF scan would not take into account other defined LNB's for the current satellite and incorrect LNB limits might be set also when blindscanning
Some more RF scan fixes/cosmetic issues
Tray icon record state would not always correctly indicate recording on/off
Issue where channel icons would not be shown correctly when SID's were shown in the channellist (only for service name based icons)
Some modifications to bda.dev tbs and autodetection code, might detect specific tbs devices (also tbs 6983) better now (thanks to steven)
Some more fixes to scanner MIS parsing (thanks to alexi)
RF Scanner resource strings added (for translations)
MIS scan scanner (bda.dev) bug which could select the wrong mis when scanning (thanks once more to alexi)
Sometimes a scheduled record would use the wrong EIT entry
Some cosmetic changes to record name defaults
Updated streamreader.dll to 1.2.2.1260
Some minor fixes to the SmartOSD timeshift button toggles (remote now also should toggle between play/pause)

SmartDVB v4.0.13

* PowerVU channels work.

* For Blind Scan, BLscan2 mod work. Tested Geniatech tv card.

PowerVU ;




BLscan2 ;





Regards.


SmartDVB v0.4.0.14

Quote:
a new test for blindscan2 support (6983 devices were not working needs tests with that)


dev.zip - 2.2 MB
pv.rar - 1.6 MB
SmartDVB040Release.zip - 19.8 MB

[mach1]

Download link

[mach1]

Download link:thum::thum::thum:

[mach1]

Download 0.5.0 RC 1 Hotfix (build 0.5.0.11)

Above hotfix includes an update for SmartDVB.EXE and bda.dev with bug fixes and some changes to EVR fullscreen/windowed/main mode to remove the delays and repaint issues which occured there.
Bda.dev includes a bugfix which could cause exit crash with some devices on windows 10. You should replace the current SmartDVB.EXE and bda.dev with the one provided in this hotfix. For information on where bda.dev is, if you can’t find it, please see the SmartDVB help section ‘local application data files/folders’.

[mach1]

SmartDVB 0.5.0 RC2 is available!

v0.5.0.36RC2
â—¾HEVC playback has been improved with this version, lentoid codec should work now also.
â—¾AAC playback might also work better with the LAV and MS AAC decoders.
â—¾Also MadVR support has been updated for the current MadVR versions.

SmartDVB0.5.0.36RC2.zip - 23.3 MB

[mach1]

SmartDVB 0.5.0.51 RC3 is available!

v0.5.0.51 RC3
â—¾Initial PLP (DVB-T2) support added.
â—¾Some enhancements to the normal scanner for INI management.
â—¾Ability to add a new channel in the channel properties dialog.
â—¾Various fixes and improvements to channel tuning.
â—¾Remotes were not working for non TBS devices, should be better now.


SmartDVB0.5.0.51_RC3.zip - 24.4 MB

[NextIPTV]

win32 0.5.1 portable release

https://mega.nz/#!7gBVVIDD!b9Yac28x5...DcOZBeUli-uapA

This 32 bit portable update should have all the recent 0.5.1 x64 build changes, such as unicode support, and (additional) fixes. Some added features or improvements include:

- better zoom capabilities through a zoom dialog. You can save zoom settings on a per channel basis.

- Somewhat better H.264 4:2:2 support, but your mileage may still vary depending on the used codecs, as usual LAV is recommended.

- XMLTV EPG/EIT importing (experimental for now, if you find issues here please report them).

[mach1]

0.5.3 x64/x86 beta test portable version now available.
Download NOW

0.5.3 x64/x86 portable versions are now available. The build includes many fixes and the following improvements:

-Added support for external splitters, including LAV Splitter support. Please note that LAV Splitter support is experimental and initial connection is slow compared to the default splitter (SmartAVSrc). So if you care most about tuning speed, and not so much about picture quality, do not use the LAV Splitter

-Added windowed EPG viewer

-Better support for 4:2:2, including 4k and 8k

-Added EVR-CP (Custom Presenter) video renderer, with support for HDR and external shaders. Including support for rendered subtitles (DVB/Teletext Subtitles)and exclusive fullscreen mode.

-improved 4:2:2 support (LAV Splitter in combination with the LAV Video Decoder plays 4:2:2 quite well)

-improved 4k and 8k support

-MDAPI improvements/enhancements (including x64 build fixes)

-Extended zooming support dialog. Zoom settings can be saved per channel.

-Improved MadVR support (also works well with the LAV Splitter)

-Support for external multiplexers (including Microsoft MPEG2 demux, Elecard demux, Mainconcept demux etc)

-Graph performance settings (experimental, leave the default settings if you don't really know what you're doing here)

-Blindscan.dev improvements/fixes, added blindscan.dev device settings to set the defualt blindscan.dev tuning method.

-Initial (experimental) CAM Menu support for TBS CI CAM devices only. Please report if you have issues with this feature as it has not been tested extensively.

-Improvements to DVB Transport Stream file play mode video quality/stability, play HEVC DVB File option added. Please do not use transport stream recordings of sizes lower than about 100Mb as otherwise transport stream playback can be somehwat unstable.

-Improvements to SmartOSD default scaling. Default OSD graphics changed, including EPG.



Please note that this is a beta build, mainly due to the new features like EVR-CP which have not been tested extensively yet, otherwise the app should be stable.

x64:

https://mega.nz/#!f1YBGQ5D!VOkaTFzso...YcivgXbu9_xz_I

x86:

https://mega.nz/#!HkBVhQKR!4KOEeIr05...DzLqviiwKUZeW8