Dimensions147(L) x 87(W) x 42(H) mmPower & Temperature Display30~800W/ -9 ¡ÆC~+99 ¡ÆCFan Compatibility1 X 4-Pin (Supports fans with PWM function)3 X 3-Pin (Supports fans with RPM output function)Fan RPM Control60~5940rpmPWM Regulation Method (Fan No.4)Voltage Control Method (Fan No.1~3)Output Current0.7AOutput Voltage+4~11VDCInput Voltage+12VDC/+5VDC
Graphic Power Load Meter: Displays power between 30 to 800W in 4 stages.¨èNumeric Power Load Display: Numerically displays power between 30 and 800W.
(The Numeric Power Load Display will read ¡°LLL¡±when an overflow occurs. ¡°LLL¡±indicates power loads beyond the unit¡¯s measurable range.) ¨é Fan Status Display: The Fan¡¯s operation status is indicated with animated propeller images.¨êFan Channels¨ëRPM Display: During RPM Setting, RPM is displayed in units of 60RPM, and actual operational RPM is displayed in units of 10RPM.¨ìTemperature Display: Displays temperature readings between -9 ¡ÆC and +99 ¡ÆC¨íJog Wheel: Used for adjusting Fan RPM. RPM can be set from 1000 to 5940RPM in units of 60RPM.¨îMode Button: Used for selecting a Fan Channel and saving the Fan RPM setting. çStandard Fans (Fan 1~3): 3-Pin fans that include the RPM output function can be connected for use.
PWM Fan (Fan 4): 4-Pin fan that includes the PWM function can be connected for use.¨èTemperature Sensing: Four temperature sensors can be connected.¨é CVS Terminal: Receives the measured values of the CVS.¨êPower Connector: Connects with the PSU¡¯s 4-Pin connector.
Operational Guidelines- Four channels of ZM-MFC2 detect fan RPM signals.
- The Alarm will activate if a fan is not connected or if there is no RPM input signal for any of the channels.
- To deactivate the Alarm, the Stand-By Mode (default setting: ON) of each unused channel must be deactivated. 1.1. Selecting a Channel/Deactivating Stand-By Mode
(1) Select a channel with the Mode Button (The selected channel will begin to flicker).
(2) Press the Jog Wheel to deactivate the selected channel¡¯s Stand-By Mode. The fan image will turn off.
(3) Deactivate the Stand-By Mode of all unused channels as mentioned above.Note: Deactivating the Stand-By Mode of all the channels will not deactivate other functions (Channel Output, RPM Display, RPM Setting & Saving etc.)2.2. RPM Setting and Saving
(1) Select a channel with the Mode Button.
(2) Set the RPM with the Jog Wheel. (Turning the Jog Wheel in clockwise motion will increase the RPM, and turning it counter-clockwise will decrease the RPM)
(3) Press the Mode Button again to save the set value and to select the next channel.
(If nothing is input for 5 seconds, the ZM-MFC2 will automatically save the latest setting and leave the Setting Mode).3.3. Initializing to Default Settings
Press the Mode Button for 3 seconds. (The entire display will be on for 1 second and all fans will be set to 1500 RPM)
1) One ZM-MFC2
2) One CVS (Current/Voltage Sensor)
3) One Bracket/CVS Extension Cable
4) Four Temperature Sensors
5) Fan Cables – 3-Pin 1EA, 4-Pin 1EA, Y-Cable 1EA, C3 Cable 1EA
6) Four ZM-MFC2 Installation Bolts
7) One Bracket Installation Bolts
8) One User¡¯s Manual
Yorum yap