LibreELEC KODI 19 @balbes150

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200114
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200114

Son Derleme Sürümü: 20200114
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

The new version of the LE images 20200114
*******************************************
Please note, now on the site I upload only one TAR file to update for the entire group of devices.
1. Everyone chooses for himself what systems to use it. No one is forcing you to use LE.
2. The launch system in Coreelec is not compatible with LibreELECE and Armbian. If you run
coreelec on your TV box, you will no longer be able to run LE and Armbian normally until the
full recovery of the standard firmware via the USB Burn Tool and the new activation of the
universal multi-boot, which is used in all new systems.

The new version of images 20191209. This version changes the DTB setting principle for
the Odroid N2 model. Now the principle of setting is the same for all devices. You need to
use two files (uEnv.ini) and (extlinux.conf). For models based on g12 (s905x2 s922), which
have a problem not the correct color of the Kodi interface, you need to use the SD card to
write the image and additionally download and copy the file to the SD card (u-boot.ext).

https://yadi.sk/d/srrtn6kpnsKz2/Libr...U-BOOT-FIX-G12

Saygılar

[ozkaradag]

The new test version of the LE 20200115.

Added installation in eMMC for the G12 platform along with color correction. For this function to work correctly, you need to update the universal multi-upload (a similar new version of multi-upload will now be used in Armbian >=19.11.5).

Before installing to eMMC, be sure to make a full backup of the entire eMMC.

Pay attention.
The DTB configuration algorithm has changed. Now a single file (uEnv.txt) will be used for all versions of my images for Rockchip (rk33xx) Allwinner H6 Amlogic s9xxx platforms. The principle of setting is the same - you need to correctly specify the name of the dtb used in the string (FDT=).

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200115
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200115

Son Derleme Sürümü: 20200115
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200124
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200124

Son Derleme Sürümü: 20200124
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200130
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200130

Son Derleme Sürümü: 20200130
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200201
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200201

Son Derleme Sürümü: 20200201
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200205
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200205

Son Derleme Sürümü: 20200205
https://yadi.sk/d/srrtn6kpnsKz2/Libr...d-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200206
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200206

Son Derleme Sürümü: 20200206
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200210
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200210

Son Derleme Sürümü: 20200210
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200213
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200213
https://yadi.sk/d/srrtn6kpnsKz2/Libr...200213-aarch64
Son Derleme Sürümü: 20200213
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar
Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar


1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200214
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200214
https://yadi.sk/d/srrtn6kpnsKz2/Libr...200214-aarch64

Son Derleme Sürümü: 20200214
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar
Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar


1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

WeTek Play 2 için Boot.ini dosyası:
https://yadi.sk/d/srrtn6kpnsKz2/upda...BOOT.INI/WETEK
https://yadi.sk/d/srrtn6kpnsKz2/update_uboot/v05

LibreELEC KODI 19
https://yadi.sk/d/srrtn6kpnsKz2/Libreelec

Son Derleme Sürümü: 20200217
https://yadi.sk/d/srrtn6kpnsKz2/Libr...DI-19/20200217
https://yadi.sk/d/srrtn6kpnsKz2/Libr...200217-aarch64

Son Derleme Sürümü: 20200217
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz
MSD Kart
https://yadi.sk/d/srrtn6kpnsKz2/Libr...4-amlgx.img.gz

Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar
Manuel Update
https://yadi.sk/d/srrtn6kpnsKz2/Libr...f834-amlgx.tar


1. This thread is for discussion of LibreELEC images created by myself.
If you prefer to use another OS, please keep discussion about that OS in
other forums. Off-topic posts about other OS will be deleted to moved to
other threads.

2. LibreELEC (and Armbian) use a different u-boot configuration from CE.
If you want to switch between distros you will need to clear the stored u-boot
configuration first. The mainline kernel does not allow access to the u-boot
environment from userspace, so this is easiest done by restoring the original
firmware of the device using Amlogic "USB Burn Tool" software. If using CE
or other distros that still use the legacy (vendor) u-boot the u-boot environment
can be cleared from within the OS before switching.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This
variant of multi-loading system is fully compatible with Armbian etc systems for TV
boxes. If it is already activated with the previous images, you do not need to repeat
the activation.

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel 20200302

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...-amlg12.img.gz

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...834-amlg12.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel 20200303

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Saygılar

[Ressamm]

LibreELEC KODI 19 @balbes150

LibreELEC KODI 19 @balbes150

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel

LibreELEC-ARM-ALL.arm&aarch64 9.80-devel 20200304

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

MSD Kart
https://yadi.sk/d/8vNYuuxynz1L0w/202...4-amlgx.img.gz
Manuel Update
https://yadi.sk/d/8vNYuuxynz1L0w/202...f834-amlgx.tar

1.
This thread is for discussion of LibreELEC images created by myself. If you prefer to use another OS,
please keep discussion about that OS in other forums. Off-topic posts about other OS will be deleted
to moved to other threads.

2.
The start system in Coreelec is not compatible with LibreELECE Armbian etc. If you run coreelec on
your TV box, you will no longer be able to run LE and Armbian normally until the full recovery of the
standard firmware via the USB Burn Tool and the new activation of the universal multi-boot, which is
used in all new systems.

Test images LibreELEC KODI-19 for platform Amlogic S9xxx
To start the system from external media, you must use a universal multi-boot. This variant of multi-loading
system is fully compatible with Armbian etc systems for TV boxes.

Please note that the DTB configuration order has changed.
Now a single configuration method is used for all Rockchip Allwinner Amlogic platforms. The file (uEnv.txt)
is used for configuration DTB all platforms.
Now a single configuration method is used for all platforms, using the file (uEnv.txt). You need to edit this file
to configure it. You need to uncomment the two lines that are responsible for your platform and specify the
correct DTB for your model. If you use this image to run on the one platform, you can delete it from the settings
file (uEnv.txt) strings from other platforms.

Pay attention.
The installation algorithm in eMMC has changed. My recommend that you perform a clean installation in eMMC.
Be sure to make a full backup of eMMC before installing it in eMMC.
For this purpose, the universal multiboot for AML has been updated. For the system to work correctly on AML,
you need to update the multiboot.

Fix for correct color to G12
For models based on g12 (s905x2 s922), which have a problem not the correct color , to SD card to write the
image and rename u-boot.sd to u-boot.ext, to USB to write the image and rename u-boot.usb to u-boot.ext

Saygılar