Connect your VN (VISIONNET) to the TV.
Turn on your VN (VISIONNET)
Turn on EMU (Emulation)
1.Press Menu (On remote control)
2.See if you have got smart card in the menu on the TV screen at the button of the screen.
3.You have not got one press 9999.
4.The screen will change and you will see the smart card in the menu on the screen at the botton.
5. You can know get some scramble channels with the EMU.
***********************************************
Updating the stb with Box loader.
To update the box, you will need a null cable. Here is how you update.
IF YOU HAVE ALL READY UPDATE BOOTLOADER DOES GOTO STEP 1 to 3 then 9
1. Plug in the stb and leave in stand by.
2. But the null cable from the computer to the stb.
3. Start up box loader.
4. Click update Boot loader.
5. Find the new software you want to send to the stb S or CIS.
6. Click on it and then click open.
7. Then you will see the screen on the computer of the box loader will start moveing, all so on
the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as
the box needs do do more you will see it count again and at the end you will see good in the
window of the stb.
8. Turn off the stb and but it back on.
9. Click update software.
10. Find the new software you want to send to the stb.
11. Click on it and then click open.
12. Then you will see the screen on the computer of the box loader will start moveing, all so on
the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as
the box needs do do more you will see it count again and at the end you will see good in the
window of the stb.
13. Turn off the stb and but it back on and see what the software it say in the window of the
stb and if it say the one you have loaded you are done.
***********************************************
Updating by internet.
1 Press Menu (on remote)
2 Press Options
3 Press internet software upgrade
4 Press INPUT URL
5 Click OK
6 Them Click OK
7 Will say sever connecting
8 A other box will come on ROM IMAGE WILL BE UPGRADED AFTER REBOOT
9 click OK
10 The Box will reboot
11 Will start downloading the software
12 Do not turn off untill GOOD is in the window of the box
************************************************** *********
update to server choose Visionnet 8000S
IMPORTMENT FOR VISIONNET8000sYOU HAVE TO UPDATE special edition 1.0 & sw1.18 Visionnet 8000CIS by BOOT-LOADER
For VISIONNET8000s
1.Update boot-loader with special edition 1.0 (VN8000S not CIS) For CIS does use Visionnet 118_server_choose
2.Update boot-loader sw1.18 Visionnet 8000CIS & S server choose
Then update with SOFTWARE.
Upgrade by SOFTWARE
3. upgrade software to latest version
**************************************
update to server choose Visionnet 8000CIS by BOOT-LOADER
1.Update boot-loader sw1.18 Visionnet 8000CIS & S server choose
******************************
Upgrade by SOFTWARE
2. upgrade software to latest version
******************************************
CHANGING SEVERS.
Made by Graham7
I have redone this to make it more easy to understand I hope.
Updated 22/7/06 Added more to it if you can not do it know give up .
When you have update your VISIONNET8000s or VISIONNET8000CIS do this below.
4.Press menu(On remote control)
5.Press the down arrow by the list OK button(On remote control)
6.installation,(Will turn Blue)
7.Click list OK(On remote control)
8.Press the down arrow by the list OK button 3 times(On remote control)
9.Goto factory default(Will turn to Blue)
10.press list OK(On remote control)
11.You will get a BIG box on the screen
12.press Back up button(YELLOW BUTTON ON THE REMOTE CONTROL)
13.A box will come on (Are you sure to backup your whole date)
14.With the up arrow by the list OK(On remote control) move to OK will turn purple
15.press list OK(On remote control)
16.Wait for about 15 sec
17.A box will come on the screen(backup completed)
18.press list OK(On remote control)
19.Press the arrow left button by the list OK(On remote control)
20.The OK will turn purple
21.Clik list OK(On remote control)
22.The VISIONNET8000cis or s will reboot wait until it turns back on.
23.Press Menu(On remote control)
24.Press the down arrow button by the list OK(On remote control)
25.goto options will turn purple (on the VISIONNET)
26.Press list OK(On remote control)
27.Press the down arrow by the list OK(On remote control) 6 times or the up arrow 1 time Faster
28.system information will turn purple (on the VISIONNET)
29.Press list OK (On remote control)
30.A big box will come on with all the information.
31.press Info key(On remote control)
IF YOU DO NOT GET THE BOX(REGION DIALOG BOX) HAVE YOU UPDATED YOUR STB WITH BOOTLOADER THEN UPDATE WITH SOFTWARE.
32.A box will come on (Region Dialog Box)
33.enter server address(You only enter 2 digit 33 for 33FF or 0D for 0DFF)
34.After you have enter what you want it will goto the OK(Will turn purple)
35.press list OK(On remote control)
36.Press exit 2 times(On remote control)
37.Use the arrow buttons by the list OK(On remote control)
38.Goto installation(Will turn Blue)
39.Change you ant to what you have got(On remote control & on the VISIONNET) .
40.Click OK make sure it is purple(On remote control)
41.Add the sats you have got.(On remote control)
42.Press Exit(On remote control)
43.A box will come on the screen move it so the OK is in purple(On remote control).
44.Click OK(On remote control)
45.Press the arrows by the list OK(On remote control)
46.Goto Network setup(on the VISIONNET it will turn Blue)
47.Press list OK(On remote control)
48.Press the right arrow button on the remote by the list OK button and on the screen you will see it change to auto detect.
49.Click the up arrow by the list OK
50.You will see the Apply at the button turn Blue
51.press list OK(On remote control)
52.A box will come on (New Configuration will be applied)
53.Click list OK(On remote control)
54.The VISIONNET8000cis or s will reboot.
55.When the VISIONNET8000cis or s come back on.
56.Press FN(On remote control)
57.Click on OK(On remote control)
58.It will tell you which Server you are on on the left hand side at the botton.
59. Press exit and you are done(On remote control)
60. after that you don't need to repeat step 1 and 2 and 3 when change server
, only need to reset to factory default
***********************************************
If you cannot get server try this
1. press menu
2. press installation
3. Goto network setup
4. Click the up arrow by the list ok
5. You will see the apply at the button go blue
6. Click list ok
7. The stb will reboot
8. Press the FN button and see if you get connect know
This is what I do sometimes or does try rebooting your stb or router.
*********************************************
First,make your conections between your PC(laptop) and receiver.
Put your receiver in standby.Remember on which one bird you are
(Astra19E-or HotBird13E).
Start BoxLoader1.2.
Choose comport first(COM 1).
After that,choose (in BoxLoader software) UPGRADE BOOTLOADER and find
WHEN DOWNLOAD START DO NOT INTERUPT UNTEEL GooD MESSAGE IS SHOWN ON
RECEIVERS DISPLAY
SW for upgrade your box you can find in our firmware section
*reprogramm the channels
*activate the smart card by pressing menue 9999
*follow the instructions below:
Visionnet setup
--------------------------
After you install and configer your dish satellites and programm all
channels, you need to activate the emulator by activating the smart
card menue.
This is done by simply pressing menue and then digit 9 many times till
you see the smart card menue
then press ok to enter this menue
you will see last line showing reset data
press ok
select reset all data
ok
then exit all menus
check the TPS CHANNELS, POLSAT, SRG SWISS, ABSAT
YOU WILL SEE THAT THEY ARE ALL WORKING
Turn on EMU
Power it off
and restart with tv.
Go to first menu level and key in 9999.
This is necessary to enable the emu.
If a smart card item appears in the first level menu then you are ready
to go
----------------------------------------------------------------
Turn on EMU
Go to first menu level and key in 9999.
And you will see the smart card come in the first menu level
You might have to press 9 more times than 4 to get it to work.
**********************************************
Turn off EMU
Go to first menu level and key in 0000.
And you will see the smart card go from the first menu level
You might have to press 0 more times than 4 to get it to work.
----------------------------------------------------------------
Note that this procedure also works on all Mvision receivers
Now, you are ready for connecting the receiver to the internet
First your computer must have an eathernet connection, if not,
get an eathernet card and install it on your computer.
while the receiver is working, connect the network cross cable
between the receiver and the computer
Assuming that you are using Dial up connection
***********************************
For windows 2000 users
Check you Local area connection
You can access this menue by start, setting, network and dial up
connection
select local area connection
proprties
select internet protoco (TCP/IP) OK
SLECT MANUAL
WRITE 192.168.0.1
255.255.255.0
THEN APPLY THIS SETTING TO YOUR COMPUTER NETWORK
check the receiver menu
installation
NETWORK SETTING
Auto detect
apply
The receiver will reboot and try to connect to your computer network
You will notice that the receiver will select aan Ip automatically
Check the network setting of the receiver
you can see that IP, FOR EXAMPLE
192.168.0.44
255.255.255.0
192.168.0.1
The IP address is unique for each unit in the network
it can take any number between 2 and 254
I mean 192.168.0.2 or (3,4,...., 254)
go to your default dial up connection
select properties
select sharing window
chech the window which allow other network users to share this
connection
apply this new setting
May be you need to restart the computer
then
connect to the internet
Check the filmnet on hotbird
if it is not working, may be you need to reboot your receiver
or
press menu
insallation
network setting
auto detect
apply
The receiver will reboot and connect to the network and the internet
If you are connecting to the internet using a DSL modem, do the same
with the DSL connection by activating the sharing option
If you are using a DSL on this computer and it is connected to a
switch
, where more than computer is sharing this connection
Just connect the receiver with a normal network cable( not cross ) to
the switch
or if you are using a router, connect the receiver directly with the
normal network cable
For advanced users
******************
You may also cofiger the IP address of the receiver manually
Assume your main network server (or router) is using
192.168.1.1
255.255.255.0
press menu
installation
network setting
manual setting
192.168.1.100
255.255.255.0
192.168.1.1
Server INF
******************
Apply
To bee able to see which one server your on :
Push ----FN----button on REMOTE
Push OK button on remote
Now you can see:33FF,0DFF,1FF
That's it,you're on.
------------------------------------------------------------------
Updating keys:
FIRST:Go to MENU>SMART CARD>AUTO UPDATE>NAGRA AU>OFF
1 Goto the any D+channel
2 Press exit and then you get hot key
3 Press list ok and then you will get a big window
4 Find the key you want to change
5 Click list ok
6 Use the arrow keys around the list ok use the down arrow first
7 Enter the code
8 When you are done goto the button OK on the screen and press list
ok
9 Then you will go back too the big window and then press exit and
thats it.
---------------------------------------------------------------------
Updating AES Key:
First go to ANY FTA chanel(Free To Aer)
1 Press menu.
2.Press smart card(you have to have the EMU on)
3 Goto Key manager.
4 Goto tbs AES Key.
5 Press list ok and you will get a big box on the screen
us the down arrow enter code then click on ok.
6 Then press the yellow button to save
7 Follow step 1 to 6 for the other key.
8 Then press exit 4 times to come out.
--------------------------------------------------------------------
"IN CASE "Conection error"
First make conection wth PC(laptop) and receiver
1:switch off box (with main switch)
2pen boxloader
3:select upgrade bootloader
3:select your .bin (right mouse click, do not start yet)
4:switch on box with main switch
wait, until display shows -DE
At that point upload should be start
Thanks to @troja47
regards and enjoy
-----------------------------------------------------------
Getting Fav1 back when you done server choose.
1.Press List OK(On remote control)
2.Press Fav(On remote control)
3.A box will come on saying Favorite(TV screen)
4.Press List OK(On remote control)
5.Press the right button by the List OK(On remote control)
6.But it on the ch**** you want
7.Press List OK(On remote control)
8.You will go to the channel you wanted
9.Press Exit(On remote control)
10.You are know back on to Fav1
************************************************** *********************
33FF 34FF EU (Europe) Servers.
************************************************** *********************
From VN to router/Switch use a straight RG45 Cable.
From VN to PC use a crossover one.
************************************************** *********************
Summary
------------
1- If you are using an ADSL router (which connects directly to
internet ) , all you need is a normal network cable ( not cross cable )
.
* if you are connecting one pc through a DSL modem to the internet,
and sharing this connection through a switch ( hub ) with other pc`s
and VN boxes, all cables are normal network cables.
2- The only case you need a cross cable between a pc and the receiver
is when you are connecting the pc to the internet ( either by dsl
modem or dialup modem ), then the cable betwean the pc an receiver
is a cross cable.
3- A third case, if you are connecting your laptop to the internet
via wirless network, then you have to allow sharing through local
area network by enabeling it in the wireless connection icon, then
connect a cross cable between pc and the receiver.
Remarks
----------
a- Some receivers connected to an ADSL routers do not get the ip
automatically or assighnes the same ip of another pc on the same
network where a conflict occures, here it would be much better to
assigh an ip manually for each box on the network.
b- A lot of problems with network connections occures when you
are using windows XP service pack 2, while it is very easy with
service pack 1 or windows 2000
************************************************** ******************
How long can you have the straight RG45 Cable
That will be fine I think the max is about 100m for twisted pair
25 meters works fine
************************************************** ******************
There is no FE for information only weather.
Make sure there is smart card is in the menu if there is this will not help you.
Answer.
Turn on EMU.
1. Press Menu
2. Press 9999 until you see smart card come into the menu.
3. The EMU is know on.
4. Exit the Menu
5. Press the FN and see if you can get the information and the weather.
6. If you can you are done if not Sorry don't know how to fix for know.
************************************************** *********************
Remove channel or sats from lists.
Thanks to gedi for the information.
1.Press menu
2.Press on channel manager
3.Press the left arrow untill you are on CH del
4.Press the yellow button and you will see it change(TP Del Sat Del CH Del)
5.Press List OK to select the channal or sats you want to remore
6.Choose, delete and there you go...
***********************************************
Find out all the information on a channal.
1. Press list OK.
2. Goto the channel you want the information on.
3. Then press info.
4. Big box will come on the screen with all the information you want.
5. Press exit
6. and press exit again to come out.
************************************************
Can I Store The Channels Data From My Receiver To The Computer
Made by dxdy(Save me from doing it )
Boxloder 1.3
- Setup Comm - connect your receiver to computer, if not working, restart computer
- Read User Data - for save channel list
- Write User Data - for upload channel list to receiver
Vision Tools 2.7
- select Idioma, Ingles for change language
- select COM Port and Connect
- Read Channel List - for save channel list
- Write Channel List - for upload channel list to receiver
************************************************** **********
Thanks to Artware
Error 0
error 0 = receiver to quick off while updating firmware (interupted)
error 3 = bad connection between computer and receiver
error 4 = wrong firmware
error 6 = error 4 (wrong firmware)
error 8 = wires 2-3 of null modemcable bad contact
************************************************** ***************
Made by gudy1981 Thanks.
easy steps to use VN with PC and not router:
1- get (buy) a cross network cable , not ordinary straight cable like the one between PC and router
2-on windows XP, go to Start --->Network Setup menu. then right click on the icone of you ethernet card connected to VN---> then Properties--->Advanced ---> then click on "allow others to connect to internet using this computer " then OK
now you have configured PC to share connexion and acts as Internet gateway
3-configure IP adress of the ethernet card ,better use static IP adresse example 192.168.0.1 (or 192.168.0.1 or 192.168.2.1 or any adresse like 192.168.x.y )
x and y can be from 1 to 254 (can not be 0 or 255)
just be sure that is not the same as the other ethernet card that connect ethernet DSL or cable modem to avoid conflict
- configure netmask 255.255.255.0
-configure DNS servers of your Internet service provider ,primary and secondary ( the same as those of the other ethernet card, you can get them by using command "IPCONFIG/ALL" in MS DOS commande line)
4-finaly configure network in your VN:
- 192.168.0.1 as gateway
-assign IP adress to VN like 192.168.0.x
x can be from 2 to 254 just be careful the three first numbers MUST be the same as IP of PC (if you use 192.168.0.1 for pc VN MUST be 192.160.0.2 for example)
-netmask is kept same 255.255.255.0
- configure on VN same DNS servers
Thanks goes to graham7.
************************************************** ************************************************** *
made by dxdy
Entering Nagra keys in emu (D+ for example)
first reset nagra in smartcard menu
menu - smartcard reset data - nagra - ok
now when select any D+ channel, press Exit and you get hot key
Entering nagra keys:
D+ 4101 key 00: xx xx xx xx xx xx xx xx yy yy yy yy yy yy yy yy
visionnet:
4101
key index 00: xx xx xx xx xx xx xx xx
key index 01: yy yy yy yy yy yy yy yy
D+ 4101 key 01: xx xx xx xx xx xx xx xx yy yy yy yy yy yy yy yy
visionnet:
4171
key index 00: xx xx xx xx xx xx xx xx
key index 01: yy yy yy yy yy yy yy yy
************************************************** ************************************************** ****
made by dxdy
How to enter BISS ID and keys
When you find BISS ID and keys, first look ID. ID have 4 digit (for example 1FFF, 1FFA, 1FF9). When entering ID in VisionNet, first digit allways must be zero (0) - for example: 0FFF, 0FFA, 0FF9.
MENU - SmartCard - Key Manager - BISS
You have only 4 spaces for entering BISS keys and only one 0FFF work!!!. If you enter more 0FFF, working only first.
For example, you must change ID to 1FFF when you want disabe this identy.
For example you want enter ID and keys for: 1FFF Megasport, 1FFA NBA TV, 1FFF MGM, 1FFF FOX TV
in Visionnet you enter:
NBA and FOX TV working:
0FFA - NBA
0FFF - FOX TV
1FFF - MGM
2FFF - Megasport
MGM and NBA working:
0FFA - NBA
1FFF - FOX TV
0FFF - MGM
2FFF - Megasport
Megasport and NBA working
0FFA - NBA
1FFF - FOX TV
2FFF - MGM
0FFF - Megasport
************************************************** *************************************************
made by dxdy
Mastercode for VisionNet VN8000S (CIS)
With this code you can change Parental Lock password (if you forget) or bypass locked channel
MENU - Options - Parental Lock Setup - 2290
************************************************** *************************************************
made by dxdy
VisionNet weather option
MENU -> Entertainment -> Weather
select blue key for change or select city
Unit Speed - wind speed, select metric (km/h) or imperial (mph)
Local Name - city name, select or enter new (you can have 9)
Live Enable - when press Info key, OSD shows weather
For change or select city first select any city (Local Name), and go to Area Code
In Local Name enter city name, in Local Code enter weather code, then select OK.
If you need to find weather code, go to http://www.weather.com/common/drilldown/world.html
For example, you want code for Rotterdam, Netherlands
Select Europe, then Netherlands and finaly Rotterdam
Look in address bar in web browser link h**p://www.weat***************eler/local/NLXX0015
NLXX0015 is weather code for Rotterdam, Netherlands
************************************************** *************************************************
bunu tercüme edecek varmı
Turn on your VN (VISIONNET)
Turn on EMU (Emulation)
1.Press Menu (On remote control)
2.See if you have got smart card in the menu on the TV screen at the button of the screen.
3.You have not got one press 9999.
4.The screen will change and you will see the smart card in the menu on the screen at the botton.
5. You can know get some scramble channels with the EMU.
***********************************************
Updating the stb with Box loader.
To update the box, you will need a null cable. Here is how you update.
IF YOU HAVE ALL READY UPDATE BOOTLOADER DOES GOTO STEP 1 to 3 then 9
1. Plug in the stb and leave in stand by.
2. But the null cable from the computer to the stb.
3. Start up box loader.
4. Click update Boot loader.
5. Find the new software you want to send to the stb S or CIS.
6. Click on it and then click open.
7. Then you will see the screen on the computer of the box loader will start moveing, all so on
the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as
the box needs do do more you will see it count again and at the end you will see good in the
window of the stb.
8. Turn off the stb and but it back on.
9. Click update software.
10. Find the new software you want to send to the stb.
11. Click on it and then click open.
12. Then you will see the screen on the computer of the box loader will start moveing, all so on
the stb on the channel you will see it counting to 100. When it has done. Wait for 30 sec as
the box needs do do more you will see it count again and at the end you will see good in the
window of the stb.
13. Turn off the stb and but it back on and see what the software it say in the window of the
stb and if it say the one you have loaded you are done.
***********************************************
Updating by internet.
1 Press Menu (on remote)
2 Press Options
3 Press internet software upgrade
4 Press INPUT URL
5 Click OK
6 Them Click OK
7 Will say sever connecting
8 A other box will come on ROM IMAGE WILL BE UPGRADED AFTER REBOOT
9 click OK
10 The Box will reboot
11 Will start downloading the software
12 Do not turn off untill GOOD is in the window of the box
************************************************** *********
update to server choose Visionnet 8000S
IMPORTMENT FOR VISIONNET8000sYOU HAVE TO UPDATE special edition 1.0 & sw1.18 Visionnet 8000CIS by BOOT-LOADER
For VISIONNET8000s
1.Update boot-loader with special edition 1.0 (VN8000S not CIS) For CIS does use Visionnet 118_server_choose
2.Update boot-loader sw1.18 Visionnet 8000CIS & S server choose
Then update with SOFTWARE.
Upgrade by SOFTWARE
3. upgrade software to latest version
**************************************
update to server choose Visionnet 8000CIS by BOOT-LOADER
1.Update boot-loader sw1.18 Visionnet 8000CIS & S server choose
******************************
Upgrade by SOFTWARE
2. upgrade software to latest version
******************************************
CHANGING SEVERS.
Made by Graham7
I have redone this to make it more easy to understand I hope.
Updated 22/7/06 Added more to it if you can not do it know give up .
When you have update your VISIONNET8000s or VISIONNET8000CIS do this below.
4.Press menu(On remote control)
5.Press the down arrow by the list OK button(On remote control)
6.installation,(Will turn Blue)
7.Click list OK(On remote control)
8.Press the down arrow by the list OK button 3 times(On remote control)
9.Goto factory default(Will turn to Blue)
10.press list OK(On remote control)
11.You will get a BIG box on the screen
12.press Back up button(YELLOW BUTTON ON THE REMOTE CONTROL)
13.A box will come on (Are you sure to backup your whole date)
14.With the up arrow by the list OK(On remote control) move to OK will turn purple
15.press list OK(On remote control)
16.Wait for about 15 sec
17.A box will come on the screen(backup completed)
18.press list OK(On remote control)
19.Press the arrow left button by the list OK(On remote control)
20.The OK will turn purple
21.Clik list OK(On remote control)
22.The VISIONNET8000cis or s will reboot wait until it turns back on.
23.Press Menu(On remote control)
24.Press the down arrow button by the list OK(On remote control)
25.goto options will turn purple (on the VISIONNET)
26.Press list OK(On remote control)
27.Press the down arrow by the list OK(On remote control) 6 times or the up arrow 1 time Faster
28.system information will turn purple (on the VISIONNET)
29.Press list OK (On remote control)
30.A big box will come on with all the information.
31.press Info key(On remote control)
IF YOU DO NOT GET THE BOX(REGION DIALOG BOX) HAVE YOU UPDATED YOUR STB WITH BOOTLOADER THEN UPDATE WITH SOFTWARE.
32.A box will come on (Region Dialog Box)
33.enter server address(You only enter 2 digit 33 for 33FF or 0D for 0DFF)
34.After you have enter what you want it will goto the OK(Will turn purple)
35.press list OK(On remote control)
36.Press exit 2 times(On remote control)
37.Use the arrow buttons by the list OK(On remote control)
38.Goto installation(Will turn Blue)
39.Change you ant to what you have got(On remote control & on the VISIONNET) .
40.Click OK make sure it is purple(On remote control)
41.Add the sats you have got.(On remote control)
42.Press Exit(On remote control)
43.A box will come on the screen move it so the OK is in purple(On remote control).
44.Click OK(On remote control)
45.Press the arrows by the list OK(On remote control)
46.Goto Network setup(on the VISIONNET it will turn Blue)
47.Press list OK(On remote control)
48.Press the right arrow button on the remote by the list OK button and on the screen you will see it change to auto detect.
49.Click the up arrow by the list OK
50.You will see the Apply at the button turn Blue
51.press list OK(On remote control)
52.A box will come on (New Configuration will be applied)
53.Click list OK(On remote control)
54.The VISIONNET8000cis or s will reboot.
55.When the VISIONNET8000cis or s come back on.
56.Press FN(On remote control)
57.Click on OK(On remote control)
58.It will tell you which Server you are on on the left hand side at the botton.
59. Press exit and you are done(On remote control)
60. after that you don't need to repeat step 1 and 2 and 3 when change server
, only need to reset to factory default
***********************************************
If you cannot get server try this
1. press menu
2. press installation
3. Goto network setup
4. Click the up arrow by the list ok
5. You will see the apply at the button go blue
6. Click list ok
7. The stb will reboot
8. Press the FN button and see if you get connect know
This is what I do sometimes or does try rebooting your stb or router.
*********************************************
First,make your conections between your PC(laptop) and receiver.
Put your receiver in standby.Remember on which one bird you are
(Astra19E-or HotBird13E).
Start BoxLoader1.2.
Choose comport first(COM 1).
After that,choose (in BoxLoader software) UPGRADE BOOTLOADER and find
WHEN DOWNLOAD START DO NOT INTERUPT UNTEEL GooD MESSAGE IS SHOWN ON
RECEIVERS DISPLAY
SW for upgrade your box you can find in our firmware section
*reprogramm the channels
*activate the smart card by pressing menue 9999
*follow the instructions below:
Visionnet setup
--------------------------
After you install and configer your dish satellites and programm all
channels, you need to activate the emulator by activating the smart
card menue.
This is done by simply pressing menue and then digit 9 many times till
you see the smart card menue
then press ok to enter this menue
you will see last line showing reset data
press ok
select reset all data
ok
then exit all menus
check the TPS CHANNELS, POLSAT, SRG SWISS, ABSAT
YOU WILL SEE THAT THEY ARE ALL WORKING
Turn on EMU
Power it off
and restart with tv.
Go to first menu level and key in 9999.
This is necessary to enable the emu.
If a smart card item appears in the first level menu then you are ready
to go
----------------------------------------------------------------
Turn on EMU
Go to first menu level and key in 9999.
And you will see the smart card come in the first menu level
You might have to press 9 more times than 4 to get it to work.
**********************************************
Turn off EMU
Go to first menu level and key in 0000.
And you will see the smart card go from the first menu level
You might have to press 0 more times than 4 to get it to work.
----------------------------------------------------------------
Note that this procedure also works on all Mvision receivers
Now, you are ready for connecting the receiver to the internet
First your computer must have an eathernet connection, if not,
get an eathernet card and install it on your computer.
while the receiver is working, connect the network cross cable
between the receiver and the computer
Assuming that you are using Dial up connection
***********************************
For windows 2000 users
Check you Local area connection
You can access this menue by start, setting, network and dial up
connection
select local area connection
proprties
select internet protoco (TCP/IP) OK
SLECT MANUAL
WRITE 192.168.0.1
255.255.255.0
THEN APPLY THIS SETTING TO YOUR COMPUTER NETWORK
check the receiver menu
installation
NETWORK SETTING
Auto detect
apply
The receiver will reboot and try to connect to your computer network
You will notice that the receiver will select aan Ip automatically
Check the network setting of the receiver
you can see that IP, FOR EXAMPLE
192.168.0.44
255.255.255.0
192.168.0.1
The IP address is unique for each unit in the network
it can take any number between 2 and 254
I mean 192.168.0.2 or (3,4,...., 254)
go to your default dial up connection
select properties
select sharing window
chech the window which allow other network users to share this
connection
apply this new setting
May be you need to restart the computer
then
connect to the internet
Check the filmnet on hotbird
if it is not working, may be you need to reboot your receiver
or
press menu
insallation
network setting
auto detect
apply
The receiver will reboot and connect to the network and the internet
If you are connecting to the internet using a DSL modem, do the same
with the DSL connection by activating the sharing option
If you are using a DSL on this computer and it is connected to a
switch
, where more than computer is sharing this connection
Just connect the receiver with a normal network cable( not cross ) to
the switch
or if you are using a router, connect the receiver directly with the
normal network cable
For advanced users
******************
You may also cofiger the IP address of the receiver manually
Assume your main network server (or router) is using
192.168.1.1
255.255.255.0
press menu
installation
network setting
manual setting
192.168.1.100
255.255.255.0
192.168.1.1
Server INF
******************
Apply
To bee able to see which one server your on :
Push ----FN----button on REMOTE
Push OK button on remote
Now you can see:33FF,0DFF,1FF
That's it,you're on.
------------------------------------------------------------------
Updating keys:
FIRST:Go to MENU>SMART CARD>AUTO UPDATE>NAGRA AU>OFF
1 Goto the any D+channel
2 Press exit and then you get hot key
3 Press list ok and then you will get a big window
4 Find the key you want to change
5 Click list ok
6 Use the arrow keys around the list ok use the down arrow first
7 Enter the code
8 When you are done goto the button OK on the screen and press list
ok
9 Then you will go back too the big window and then press exit and
thats it.
---------------------------------------------------------------------
Updating AES Key:
First go to ANY FTA chanel(Free To Aer)
1 Press menu.
2.Press smart card(you have to have the EMU on)
3 Goto Key manager.
4 Goto tbs AES Key.
5 Press list ok and you will get a big box on the screen
us the down arrow enter code then click on ok.
6 Then press the yellow button to save
7 Follow step 1 to 6 for the other key.
8 Then press exit 4 times to come out.
--------------------------------------------------------------------
"IN CASE "Conection error"
First make conection wth PC(laptop) and receiver
1:switch off box (with main switch)
2pen boxloader
3:select upgrade bootloader
3:select your .bin (right mouse click, do not start yet)
4:switch on box with main switch
wait, until display shows -DE
At that point upload should be start
Thanks to @troja47
regards and enjoy
-----------------------------------------------------------
Getting Fav1 back when you done server choose.
1.Press List OK(On remote control)
2.Press Fav(On remote control)
3.A box will come on saying Favorite(TV screen)
4.Press List OK(On remote control)
5.Press the right button by the List OK(On remote control)
6.But it on the ch**** you want
7.Press List OK(On remote control)
8.You will go to the channel you wanted
9.Press Exit(On remote control)
10.You are know back on to Fav1
************************************************** *********************
33FF 34FF EU (Europe) Servers.
************************************************** *********************
From VN to router/Switch use a straight RG45 Cable.
From VN to PC use a crossover one.
************************************************** *********************
Summary
------------
1- If you are using an ADSL router (which connects directly to
internet ) , all you need is a normal network cable ( not cross cable )
.
* if you are connecting one pc through a DSL modem to the internet,
and sharing this connection through a switch ( hub ) with other pc`s
and VN boxes, all cables are normal network cables.
2- The only case you need a cross cable between a pc and the receiver
is when you are connecting the pc to the internet ( either by dsl
modem or dialup modem ), then the cable betwean the pc an receiver
is a cross cable.
3- A third case, if you are connecting your laptop to the internet
via wirless network, then you have to allow sharing through local
area network by enabeling it in the wireless connection icon, then
connect a cross cable between pc and the receiver.
Remarks
----------
a- Some receivers connected to an ADSL routers do not get the ip
automatically or assighnes the same ip of another pc on the same
network where a conflict occures, here it would be much better to
assigh an ip manually for each box on the network.
b- A lot of problems with network connections occures when you
are using windows XP service pack 2, while it is very easy with
service pack 1 or windows 2000
************************************************** ******************
How long can you have the straight RG45 Cable
That will be fine I think the max is about 100m for twisted pair
25 meters works fine
************************************************** ******************
There is no FE for information only weather.
Make sure there is smart card is in the menu if there is this will not help you.
Answer.
Turn on EMU.
1. Press Menu
2. Press 9999 until you see smart card come into the menu.
3. The EMU is know on.
4. Exit the Menu
5. Press the FN and see if you can get the information and the weather.
6. If you can you are done if not Sorry don't know how to fix for know.
************************************************** *********************
Remove channel or sats from lists.
Thanks to gedi for the information.
1.Press menu
2.Press on channel manager
3.Press the left arrow untill you are on CH del
4.Press the yellow button and you will see it change(TP Del Sat Del CH Del)
5.Press List OK to select the channal or sats you want to remore
6.Choose, delete and there you go...
***********************************************
Find out all the information on a channal.
1. Press list OK.
2. Goto the channel you want the information on.
3. Then press info.
4. Big box will come on the screen with all the information you want.
5. Press exit
6. and press exit again to come out.
************************************************
Can I Store The Channels Data From My Receiver To The Computer
Made by dxdy(Save me from doing it )
Boxloder 1.3
- Setup Comm - connect your receiver to computer, if not working, restart computer
- Read User Data - for save channel list
- Write User Data - for upload channel list to receiver
Vision Tools 2.7
- select Idioma, Ingles for change language
- select COM Port and Connect
- Read Channel List - for save channel list
- Write Channel List - for upload channel list to receiver
************************************************** **********
Thanks to Artware
Error 0
error 0 = receiver to quick off while updating firmware (interupted)
error 3 = bad connection between computer and receiver
error 4 = wrong firmware
error 6 = error 4 (wrong firmware)
error 8 = wires 2-3 of null modemcable bad contact
************************************************** ***************
Made by gudy1981 Thanks.
easy steps to use VN with PC and not router:
1- get (buy) a cross network cable , not ordinary straight cable like the one between PC and router
2-on windows XP, go to Start --->Network Setup menu. then right click on the icone of you ethernet card connected to VN---> then Properties--->Advanced ---> then click on "allow others to connect to internet using this computer " then OK
now you have configured PC to share connexion and acts as Internet gateway
3-configure IP adress of the ethernet card ,better use static IP adresse example 192.168.0.1 (or 192.168.0.1 or 192.168.2.1 or any adresse like 192.168.x.y )
x and y can be from 1 to 254 (can not be 0 or 255)
just be sure that is not the same as the other ethernet card that connect ethernet DSL or cable modem to avoid conflict
- configure netmask 255.255.255.0
-configure DNS servers of your Internet service provider ,primary and secondary ( the same as those of the other ethernet card, you can get them by using command "IPCONFIG/ALL" in MS DOS commande line)
4-finaly configure network in your VN:
- 192.168.0.1 as gateway
-assign IP adress to VN like 192.168.0.x
x can be from 2 to 254 just be careful the three first numbers MUST be the same as IP of PC (if you use 192.168.0.1 for pc VN MUST be 192.160.0.2 for example)
-netmask is kept same 255.255.255.0
- configure on VN same DNS servers
Thanks goes to graham7.
************************************************** ************************************************** *
made by dxdy
Entering Nagra keys in emu (D+ for example)
first reset nagra in smartcard menu
menu - smartcard reset data - nagra - ok
now when select any D+ channel, press Exit and you get hot key
Entering nagra keys:
D+ 4101 key 00: xx xx xx xx xx xx xx xx yy yy yy yy yy yy yy yy
visionnet:
4101
key index 00: xx xx xx xx xx xx xx xx
key index 01: yy yy yy yy yy yy yy yy
D+ 4101 key 01: xx xx xx xx xx xx xx xx yy yy yy yy yy yy yy yy
visionnet:
4171
key index 00: xx xx xx xx xx xx xx xx
key index 01: yy yy yy yy yy yy yy yy
************************************************** ************************************************** ****
made by dxdy
How to enter BISS ID and keys
When you find BISS ID and keys, first look ID. ID have 4 digit (for example 1FFF, 1FFA, 1FF9). When entering ID in VisionNet, first digit allways must be zero (0) - for example: 0FFF, 0FFA, 0FF9.
MENU - SmartCard - Key Manager - BISS
You have only 4 spaces for entering BISS keys and only one 0FFF work!!!. If you enter more 0FFF, working only first.
For example, you must change ID to 1FFF when you want disabe this identy.
For example you want enter ID and keys for: 1FFF Megasport, 1FFA NBA TV, 1FFF MGM, 1FFF FOX TV
in Visionnet you enter:
NBA and FOX TV working:
0FFA - NBA
0FFF - FOX TV
1FFF - MGM
2FFF - Megasport
MGM and NBA working:
0FFA - NBA
1FFF - FOX TV
0FFF - MGM
2FFF - Megasport
Megasport and NBA working
0FFA - NBA
1FFF - FOX TV
2FFF - MGM
0FFF - Megasport
************************************************** *************************************************
made by dxdy
Mastercode for VisionNet VN8000S (CIS)
With this code you can change Parental Lock password (if you forget) or bypass locked channel
MENU - Options - Parental Lock Setup - 2290
************************************************** *************************************************
made by dxdy
VisionNet weather option
MENU -> Entertainment -> Weather
select blue key for change or select city
Unit Speed - wind speed, select metric (km/h) or imperial (mph)
Local Name - city name, select or enter new (you can have 9)
Live Enable - when press Info key, OSD shows weather
For change or select city first select any city (Local Name), and go to Area Code
In Local Name enter city name, in Local Code enter weather code, then select OK.
If you need to find weather code, go to http://www.weather.com/common/drilldown/world.html
For example, you want code for Rotterdam, Netherlands
Select Europe, then Netherlands and finaly Rotterdam
Look in address bar in web browser link h**p://www.weat***************eler/local/NLXX0015
NLXX0015 is weather code for Rotterdam, Netherlands
************************************************** *************************************************
bunu tercüme edecek varmı
Yorum yap