Latest Emu Cams & Oscam Emu Files [11704]

[mach1]

r11214 with 3mu (run on vu+ and other oe2.2 images)
make oscam less talking in default log only move some output to dvbapi DEBUG no function change

http://wetektr.com/WeTek/index.php?d...mu-patched.zip

[mach1]

Blackhole oscam 11215+cccam
http://wetektr.com/WeTek/index.php?d...m213_E2_bh.tar

[mach1]

OSCam 1.20 svn 11215


http://wetektr.com/WeTek/index.php?d...f-Light.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

[mach1]

OSCam 1.20 svn 11219

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...f-Light.tar.gz

[mach1]

OSCam 1.20 rev 11219 emu

http://wetektr.com/WeTek/index.php?d...li-4.0-emu.rar

http://wetektr.com/WeTek/index.php?d...-oe2.0-emu.rar



OSCam 1.20 rev 11219

http://wetektr.com/WeTek/index.php?d...19-Pli-4.0.rar

http://wetektr.com/WeTek/index.php?d...1219-oe2.0.rar

[mach1]

The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS
Special features:
==========

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)

Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir.
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


WebIf - Special WebIf-Design included

This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".



PowerVU config:
==========

!!! W A R N I N G !!! - with JoeUser's new version, the SoftCam.Key file format has changed.

Now, each key is prefixed with a group ID:
Group ID (4 hex digits) + SID (4 hex digits)

Keys in SoftCam.Key:

P <groupid><srvid> <nb> <key>
Where: groupid = any 4 hex digits signifying unique group for all channels using the same keys.
(Leading zeros not necessarry, but makes viewing the file easier...)
srvid = SID (Service ID) of channel in hex with leading zeros to make 4 hex digits.
nb = key number (00/01)
key = ecm key

example groupid=0x1, sid=0x1234, keys 00 and 01:
P 00011234 00 11223344556677
P 011234 01 22334455667788

example groupid=0x2, sid=0x34, keys 00 and 01:
P 00020034 00 00112233445566
P 0020034 01 00223344556677

For channels with the same srvid the correct key will be detected automatically, but each key needs a unique groupid.

P 009E0234 01 11223344556677
P 00040234 01 22334455667788
P 013E0234 01 33445566778899

WARNING - duplicate <groupid><srvid> are not allowed anymore - only the last instance will be used!

AU keys:
P <groupid> <UA> <key>
example:
P 009E 11223344 11223344556677
P 009E 44332211 22334455667788
P 0004 22334455 33445566778899
P 013E 00112233 00112233445566

Multiple UA keys are allowed for each group and each UA will update ALL ecm keys in the group.

NOTE: in order to work, the ecm keys must be "seeded" in the file for each SID you want to update since the UA has no information about sids.
So to add a key that is unknown, enter a dummy key to get updated, for example:

P 00010004 00 00000000000000000
P 00010004 01 00000000000000000

Also note: Duplicate powervu keys are no longer allowed (unnecessary since duplicate SIDs should now have a unique group ID.)
So, if there are any duplicates, only the last key in the file will be used.
This also means that as new keys are found and appended to the file, they will automatically replace earlier keys.



On compatible Dreambox STBs:

1) Disable the Stream Relay:
Webif -> Config -> Stream Relay -> Mode
0 - disabled (default)
1 - enabled

or in oscam.conf:

[streamrelay]
stream_relay_enabled = 0

On other devices the Stream Relay must be used.


2) Select the correct DVB-Api extended CW API:
Webif -> Config -> DVB-Api -> API for extended CWs
0 - disabled (default)
1 - OE 2.2
2 - OE 2.0

or in oscam.conf:

[dvbapi]
extended_cw_api = 1 or 2


3) New Parameter: Process EMM from stream
Webif -> Config -> Stream Relay -> Process EMM from stream
0 - disabled (default)
1 - enabled

or in oscam.conf:

[streamrelay]
stream_emm_enabled = 0 or 1



Oscam Complete - Minimal:
================

- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

Additional for "armv7", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm", "armv7", "rasb_hard", "rasb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "rasb_hard", "rasb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "armv7" a binary with "dvbapi", "libusb" and "pcsc".
Additional for "armv7" a binary with "dvbapi".
Additional for "armv7" a binary with "pcsc".



Explanation of sub-directories:
===================

Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU example: Receiver (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (zb. WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 (All Mipsel, OpenSSL 1.0 (also OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si(PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool = Coolstream Box
build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_armv7 = Raspberry Pi 2, Banana Pi M2, Vu+ Solo 4k
build_dir_rasb_hard = Raspberry Pi HardFPU
build_dir_rasb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)

Dosyalar yükleniyor

[mach1]

SU-Oscam-SU-334-EMU-331-731-JoeUser-SB-11219-part5.tar.gz - 22.1 MB
SU-Oscam-SU-334-EMU-331-731-JoeUser-SB-11219-part3.tar.gz - 15.2 MB
SU-Oscam-SU-334-EMU-331-731-JoeUser-SB-11219-part6.tar.gz - 15.9 MB
SU-Oscam-SU-334-EMU-331-731-JoeUser-SB-11219-part4.tar.gz - 17.0 MB
SU-Oscam-SU-334-EMU-331-731-JoeUser-SB-11219-part2.tar.gz - 18.6 MB
SU-Oscam-SU-334-EMU-331-731-JoeUser-SB-11219-part1.tar.gz - 15.9 MB

[mach1]

Oscam 11220+Cccam Blackhole

http://wetektr.com/WeTek/index.php?d...m213_E2_bh.tgz

[mach1]

OSCam 1.20 svn 11220

http://wetektr.com/WeTek/index.php?d...f-Light.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

[mach1]

Oscam with patch emu

Quote:
Changeset [11220] by gorgone.impertinence
revert html renaming
Changeset [11219] by gorgone.impertinence
fix lbstats for reader
Changeset [11218] by gorgone.impertinence
fix for loadbalancer timeout
Changeset [11217] by gorgone.impertinence
fix for last commit
Changeset [11216] by gorgone.impertinence
add detect for multics in oscam first patch by savan
svn11220 Pli40_fpu Version mit SSL und libusb z.B. für octagon SF3038 getestet unter openatv 5.1/5.2/5.3



http://wetektr.com/WeTek/index.php?d...mu-patched.zip

http://wetektr.com/WeTek/index.php?d...ssl-libusb.zip

[mach1]

Oscam 11125 emu

http://wetektr.com/WeTek/index.php?d...li-4.0-emu.rar

http://wetektr.com/WeTek/index.php?d...-oe2.0-emu.rar




SU-Oscam-SU-336-EMU-331-731-JoeUser-SB-11225





Special features:
=================

Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)

Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir.
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


WebIf - Special WebIf-Design included

This version creates a virtual card reader, which is configured automatically.
You may save the default reader configuration with the webif and then modify it to your own liking.

SoftCam.Key:
OSCam-EMU does not require, but will make use of "SoftCam.Key" if available.
"SoftCam.Key" is searched in the oscam config folder (where oscam.conf is located) and also in "/var/keys".



PowerVU config:
===============

!!! W A R N I N G !!! - with JoeUser's new version, the SoftCam.Key file format has changed.

Now, each key is prefixed with a group ID:
Group ID (4 hex digits) + SID (4 hex digits)

Keys in SoftCam.Key:

P <groupid><srvid> <nb> <key>
Where: groupid = any 4 hex digits signifying unique group for all channels using the same keys.
(Leading zeros not necessarry, but makes viewing the file easier...)
srvid = SID (Service ID) of channel in hex with leading zeros to make 4 hex digits.
nb = key number (00/01)
key = ecm key

example groupid=0x1, sid=0x1234, keys 00 and 01:
P 00011234 00 11223344556677
P 011234 01 22334455667788

example groupid=0x2, sid=0x34, keys 00 and 01:
P 00020034 00 00112233445566
P 0020034 01 00223344556677

For channels with the same srvid the correct key will be detected automatically, but each key needs a unique groupid.

P 009E0234 01 11223344556677
P 00040234 01 22334455667788
P 013E0234 01 33445566778899

WARNING - duplicate <groupid><srvid> are not allowed anymore - only the last instance will be used!

AU keys:
P <groupid> <UA> <key>
example:
P 009E 11223344 11223344556677
P 009E 44332211 22334455667788
P 0004 22334455 33445566778899
P 013E 00112233 00112233445566

Multiple UA keys are allowed for each group and each UA will update ALL ecm keys in the group.

NOTE: in order to work, the ecm keys must be "seeded" in the file for each SID you want to update since the UA has no information about sids.
So to add a key that is unknown, enter a dummy key to get updated, for example:

P 00010004 00 00000000000000000
P 00010004 01 00000000000000000

Also note: Duplicate powervu keys are no longer allowed (unnecessary since duplicate SIDs should now have a unique group ID.)
So, if there are any duplicates, only the last key in the file will be used.
This also means that as new keys are found and appended to the file, they will automatically replace earlier keys.



On compatible Dreambox STBs:

1) Disable the Stream Relay:
Webif -> Config -> Stream Relay -> Mode
0 - disabled (default)
1 - enabled

or in oscam.conf:

[streamrelay]
stream_relay_enabled = 0

On other devices the Stream Relay must be used.


2) Select the correct DVB-Api extended CW API:
Webif -> Config -> DVB-Api -> API for extended CWs
0 - disabled (default)
1 - OE 2.2
2 - OE 2.0

or in oscam.conf:

[dvbapi]
extended_cw_api = 1 or 2


3) New Parameter: Process EMM from stream
Webif -> Config -> Stream Relay -> Process EMM from stream
0 - disabled (default)
1 - enabled

or in oscam.conf:

[streamrelay]
stream_emm_enabled = 0 or 1



Oscam Complete - Minimal:
=========================

- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)
- GBox

Additional for "armv7", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm", "armv7", "rasb_hard", "rasb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "rasb_hard", "rasb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "armv7" a binary with "dvbapi", "libusb" and "pcsc".
Additional for "armv7" a binary with "dvbapi".
Additional for "armv7" a binary with "pcsc".



Explanation of sub-directories:
===============================

Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU example: Receiver (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (zb. WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 (All Mipsel, OpenSSL 1.0 (also OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si(PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool = Coolstream Box
build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_armv7 = Raspberry Pi 2, Banana Pi M2, Vu+ Solo 4k
build_dir_rasb_hard = Raspberry Pi HardFPU
build_dir_rasb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)





SU-Oscam-SU-336-EMU-331-731-JoeUser-SB-11225-part5.tar.gz - 22.3 MB
SU-Oscam-SU-336-EMU-331-731-JoeUser-SB-11225-part4.tar.gz - 17.1 MB
SU-Oscam-SU-336-EMU-331-731-JoeUser-SB-11225-part3.tar.gz - 15.3 MB
SU-Oscam-SU-336-EMU-331-731-JoeUser-SB-11225-part2.tar.gz - 18.7 MB
SU-Oscam-SU-336-EMU-331-731-JoeUser-SB-11225-part6.tar.gz - 16.0 MB
SU-Oscam-SU-336-EMU-331-731-JoeUser-SB-11225-part1.tar.gz - 16.0 MB

[mach1]

OSCam 11225 For ItalySat Image


http://wetektr.com/WeTek/index.php?d...alysat_all.ipk

[mach1]

OSCam 1.20 svn 11226



http://wetektr.com/WeTek/index.php?d...f-Light.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

http://wetektr.com/WeTek/index.php?d...ibution.tar.gz

[mach1]

OSCam 11226 ipk For Various Images

OSCam ipk For Various Images

Only for OE2.0/mips32el type images/receivers

RUDREAM

http://wetektr.com/WeTek/index.php?d...udream_all.ipk

OPENPLI

http://wetektr.com/WeTek/index.php?d...i_mips32el.ipk

OPENLD

http://wetektr.com/WeTek/index.php?d...openld_all.ipk

OPENVIX

http://wetektr.com/WeTek/index.php?d...x_mips32el.ipk

VTI

http://wetektr.com/WeTek/index.php?d...i_mips32el.ipk


OPENSPA

http://wetektr.com/WeTek/index.php?d...a_mips32el.ipk

OPENPLUS

http://wetektr.com/WeTek/index.php?d...s_mips32el.ipk

OPENNFR

http://wetektr.com/WeTek/index.php?d...r_mips32el.ipk

OPENESI

http://wetektr.com/WeTek/index.php?d...i_mips32el.ipk

OPENDROID

http://wetektr.com/WeTek/index.php?d...d_mips32el.ipk

OPENATV

http://wetektr.com/WeTek/index.php?d...v_mips32el.ipk

ITALYSAT

http://wetektr.com/WeTek/index.php?d...alysat_all.ipk

HYPERION

http://wetektr.com/WeTek/index.php?d...n_mips32el.ipk

BLACKHOLE

http://wetektr.com/WeTek/index.php?d...e_mips32el.ipk

SATDREAMGR

http://wetektr.com/WeTek/index.php?d...r_mips32el.ipk

[mach1]

http://wetektr.com/WeTek/index.php?d...26-Pli-4.0.rar

http://wetektr.com/WeTek/index.php?d...-oe2.0-emu.rar

http://wetektr.com/WeTek/index.php?d...1226-oe2.0.rar