Duyuru

**pro_dufa** · 21-04-2016, 22:22

Kanal listesini cihaz menüsünden düzenleyince kodi restart ile kanal listesi eski haline dönüyor. Deneyen var mı?

Sent from my iPad using Tapatalk

**ozkaradag** · 22-04-2016, 13:22

To synchronise channel list from e2, you can try e2conv.sh ( https://github.com/Shani-08/ShaniXBM...ther/e2conv.sh ).
if it is working good, than we can make one way synchronization (from e2 to tvheadend), as we want (for example: once when installing tvhedend, or every day/moth (etc with cron)).

**BiNARY** · 22-04-2016, 15:49

Oh tarama derdi de kalmamış görünüyor ben yine mnigma kurup denemeye başlayayım en iyisi. Birde kanal geçiş hızı e2 gibi olsa bırakacağım e2'yi ama malesef halen geride. Bilgilendirme için teşekkürler ozkaradag.

İyi çalışmalar...

**ozkaradag** · 22-04-2016, 16:10

[YOUTUBE]QWKP5cCiRCk[/YOUTUBE]

3 Yıldır Vu+'ın yapamadığını 9-10 ay içinde yaptı, hem de sıfırdan.

1-. E2'yi ARM'e derledi.
2-. E2 içindeki KODI'ye TV'yi entegre etti.

Kolay bir şey değil.

Resmi forumda bir kullanıcının yazdığı gibi; cancelElec, cancelDroid.

Sevgiler...

**BiNARY** · 22-04-2016, 16:12

Bu gidişle dediğin gibi nand a mnigma kurup kullanacağız. LibreELEC ilede bayağı bir boğuştum bir türlü kanal taraması yaptıramamıştım. Mnigma çok yol aldı wetek te.

**BARETTA 1** · 22-04-2016, 16:56

ustadlara bır sorum olacak.
neden e2 lerde olan hbbtv ve youtube tv eklentısı wetek e2 de yok ve oscam harıcı ccam çalışmıyor.
çalışma varmı boyle devammı.

**ozkaradag** · 22-04-2016, 17:56

Çünkü çip farklı.

Sıfırdan derlenmesi ya da ters-mühendislik dediğimiz reverse-enginerring yapılması gerekiyor.

HBBTV hariç diğer dediklerinin zaten karşılığı olduğu için gerek yok.
HBBTV de yakında gelir diye düşünüyorum.

Sevgiler...

**BiNARY** · 22-04-2016, 21:18

sh dosyasını çalıştırabilen var mı? Bir türlü convert işlemini gerçekleştiremedim.

**ozkaradag** · 22-04-2016, 22:06

Cron'a görev eklemesi yapman gerekiyor.

Sevgiler...

**BiNARY** · 22-04-2016, 22:50

Gerekli komutu yanlış giriyorum büyük ihtimalle. Terminal ile denemelerimde başarısız oldum hep.

**pro_dufa** · 25-04-2016, 08:54

script sorunlu çalışmıyor. Yada bir yerde bir eksiğimiz var. Cron a da ekledim olmadı.

**ozkaradag** · 25-04-2016, 11:38

Betiği editleyip bakmak gerek.

Buraya kadar oldu ya gerisi de olur inşallah.

Sevgiler...

**pro_dufa** · 26-04-2016, 01:07

Bu saate kadar uğraştım en son aldığım hata mesajı aşağıdaki gibi.

Kod:

root@wetekplay:/hdd/tvh# sh e2conv.sh
ERROR: Check your directories, lamedb should be version 4.
USAGE: /lamedb2tvheadend.sh /e2settingsdir /outputdir http://localhost /picondir

Press [ENTER] to exit...

root@wetekplay:/hdd/tvh#

lamedb v4 olduğunu kontrol ettim.

Ama doğru klasör ve dosyaları oluşturmak gerekebilir.

Script ve Rehber aşağıdaki gibi olacak:

Kod:

#!/bin/bash
#copied from https://raw.githubusercontent.com/picons/lamedb-conversion/master/lamedb2tvheadend.sh
#changes done
#1. changed the format for new version
#2. auto generate channel number
#3. same for groups

# ran using cygwin like after copying the rates folder in rats and create empty folder for tvh 
#$ ./e2conv.sh ./rats ./tvh
# where rats is the folder with e2 lamdb and tvh is empty output dir.
# For windows users with Notepad++, make sure this file is aved using  the option - Edit -> EOL conversion -> Unix/OSX format

################################################################################################################
### LAMEDB 2 TVHEADEND CHANNEL CONVERTER #######################################################################
################################################################################################################

# Info page with lamedb syntax explanation
# https://raw.github.com/OpenViX/enigma2/master/lib/dvb/frontendparms.h

e2settingsdir=$1
outputdir=$2
piconurl=$3
picondir=$4

################################################################################################################
### CHECKS #####################################################################################################
################################################################################################################

if [ ! -d "$outputdir" ] || [ ! -f "$e2settingsdir/lamedb" ] || ! sed -n "1{p;q}" "$e2settingsdir/lamedb" | grep -q '4'; then
    echo "ERROR: Check your directories, lamedb should be version 4."
    echo "USAGE: /lamedb2tvheadend.sh /e2settingsdir /outputdir http://localhost /picondir"
    echo ""
    echo "Press [ENTER] to exit..."
    read input
    exit 1
fi

################################################################################################################
### BASIC SETUP ################################################################################################
################################################################################################################

if [ -d "/dev/shm" ]; then
    tempdir=/dev/shm/lamedb2tvh_temp
else
    tempdir=$(dirname $0)/lamedb2tvh_temp
fi

mkdir $tempdir
#declare -i cnumber
#export cnumber
#export cnumber=0
echo "cnumber=0" > ./currentcounter.bash
cat $e2settingsdir/lamedb | iconv -f UTF-8 -t MS-ANSI -c | iconv -f MS-ANSI -t UTF-8 -c > $tempdir/lamedb
sed -i -e 's/\(^....:........:....:....:.*:.*\)/\L\1/' -e 's/\(^........:....:....\)/\L\1/' $tempdir/lamedb

################################################################################################################
### CONVERT ####################################################################################################
################################################################################################################

linescount=$(grep -h -o '^....:........:....:....:.*:.*' $tempdir/lamedb | wc -l)
currentline=0

grep -h -o '^....:........:....:....:.*:.*' $tempdir/lamedb | while read line ; do

    currentline=$((currentline+1))
    echo -ne "Converting channel: $currentline/$linescount"

    channelref=(${line//:/ })
    hexSID=${channelref[0]}
    hexTID=${channelref[2]}
    hexNID=${channelref[3]}
    hexSAT=${channelref[1]}
    
    SERVICETYPE=${channelref[4]}
    ORBITALREF=$(echo "$hexSAT" | sed 's/0*//')
    
    tuningref=$hexSAT":"$hexTID":"$hexNID
    channelref=$hexSID":"$tuningref

    channelinfo=$(grep -A2 $channelref $tempdir/lamedb)

    CHANNELNAME=$(echo "$channelinfo" | sed -n "2p" | sed -e 's/:/ /' -e 's/;/ /' -e 's/^[ \t]*//' -e 's/[ \t]*$//')
    if [ -z "$CHANNELNAME" ]; then
        CHANNELNAME="-"
    fi
    PROVIDERNAME=$(echo "$channelinfo" | sed -n "3p" | grep -o -e 'p:.*' | sed -e "s/,.*//g" -e 's/p://g' -e 's/:/ /' -e 's/;/ /' -e 's/^[ \t]*//' -e 's/[ \t]*$//')
    if [ -z "$PROVIDERNAME" ]; then
        PROVIDERNAME="-"
    fi

    tuninginfo=$(echo $(grep -A2 $tuningref $tempdir/lamedb | sed -n "2p"))
    tuninginfo=(${tuninginfo//:/ })

    case ${tuninginfo[0]} in
        s)
            # DVB-S/S2
            # 0     1           2           3               4   5       6           7       8       9           10      11
            # TYPE  FREQUENCY   SYMBOLRATE  POLARIZATION    FEC SATPOS  INVERSION   FLAGS   SYSTEM  MODULATION  ROLLOFF PILOT
            # s     12284000    27500000    0               4   130     2           0
            # s     12475500    29900000    0               3   130     2           0       1       2           0       2

            NETWORKTYPE="dvb_network_dvbs"
            
            case ${tuninginfo[3]} in
                0) POLARIZATION="H";;           #0=Horizontal
                1) POLARIZATION="V";;           #1=Vertical
                2) POLARIZATION="L";;           #2=CircularLeft
                3) POLARIZATION="R";;           #3=CircularRight
            esac

            case ${tuninginfo[4]} in
                0) FEC="AUTO";;                 #0=Auto
                1) FEC="1/2";;                  #1=1/2
                2) FEC="2/3";;                  #2=2/3
                3) FEC="3/4";;                  #3=3/4
                4) FEC="5/6";;                  #4=5/6
                5) FEC="7/8";;                  #5=7/8
                6) FEC="8/9";;                  #6=8/9
                7) FEC="3/5";;                  #7=3/5
                8) FEC="4/5";;                  #8=4/5
                9) FEC="9/10";;                 #9=9/10
               10) FEC="6/7";;                  #10=6/7
               15) FEC="NONE";;                 #15=None
            esac

            case ${tuninginfo[8]} in
             ""|0) SYSTEM="DVBS";;              #0=DVB-S
                1) SYSTEM="DVBS2";;             #1=DVB-S2
            esac

            case ${tuninginfo[9]} in
                0) MODULATION="AUTO";;          #0=Auto
             ""|1) MODULATION="QPSK";;          #1=QPSK
                2) MODULATION="8PSK";;          #2=8PSK
                3) MODULATION="QAM16";;         #3=QAM16
            esac

            case ${tuninginfo[10]} in
                0) ROLLOFF="35";;               #0=0.35
                1) ROLLOFF="25";;               #1=0.25
                2) ROLLOFF="20";;               #2=0.20
             ""|3) ROLLOFF="AUTO";;             #3=Auto
            esac

            case ${tuninginfo[11]} in
                0) PILOT="OFF";;                #0=Off
                1) PILOT="ON";;                 #1=On
             ""|2) PILOT="AUTO";;               #2=Unknown
            esac

            case ${tuninginfo[5]} in
             "-"*) SATPOS="DVB-S "$(echo "${tuninginfo[5]}" | sed 's/-//' | awk '{print $0/10}')"W";;
                *) SATPOS="DVB-S "$(echo "${tuninginfo[5]}" | awk '{print $0/10}')"E";;
            esac
            FREQUENCY="${tuninginfo[1]}"
            SYMBOLRATE="${tuninginfo[2]}"
        ;;
        t)
            # DVB-T/T2
            # 0     1           2           3           4           5           6               7       8           9           10      11
            # TYPE  FREQUENCY   BANDWIDTH   CODERATE HP CODERATE LP MODULATION  TRANSMISSION    GUARD   HIERARCHY   INVERSION   FLAGS   SYSTEM
            # t     498000000   0           5           5           3           2               4       4           2           0
            # t     722000000   0           5           5           3           2               4       4           2           0       1

            NETWORKTYPE="dvb_network_dvbt"
            POLARIZATION="NONE"
            
            case ${tuninginfo[2]} in
                0) BANDWIDTH="8Mhz";;           #0=8Mhz
                1) BANDWIDTH="7Mhz";;           #1=7Mhz
                2) BANDWIDTH="6Mhz";;           #2=6Mhz
                3) BANDWIDTH="AUTO";;           #3=Auto
                4) BANDWIDTH="5Mhz";;           #4=5Mhz
                5) BANDWIDTH="1712kHz";;        #5=1_712MHz
                6) BANDWIDTH="10Mhz";;          #6=10Mhz
            esac

            case ${tuninginfo[3]} in
                0) CODERATEHP="1/2";;           #0=1/2
                1) CODERATEHP="2/3";;           #1=2/3
                2) CODERATEHP="3/4";;           #2=3/4
                3) CODERATEHP="5/6";;           #3=5/6
                4) CODERATEHP="7/8";;           #4=7/8
                5) CODERATEHP="AUTO";;          #5=Auto
                6) CODERATEHP="6/7";;           #6=6/7
                7) CODERATEHP="8/9";;           #7=8/9
            esac

            case ${tuninginfo[4]} in
                0) CODERATELP="1/2";;           #0=1/2
                1) CODERATELP="2/3";;           #1=2/3
                2) CODERATELP="3/4";;           #2=3/4
                3) CODERATELP="5/6";;           #3=5/6
                4) CODERATELP="7/8";;           #4=7/8
                5) CODERATELP="AUTO";;          #5=Auto
                6) CODERATELP="6/7";;           #6=6/7
                7) CODERATELP="8/9";;           #7=8/9
            esac

            case ${tuninginfo[5]} in
                0) MODULATION="QPSK";;          #0=QPSK
                1) MODULATION="QAM16";;         #1=QAM16
                2) MODULATION="QAM64";;         #2=QAM64
                3) MODULATION="AUTO";;          #3=Auto
                4) MODULATION="QAM256";;        #4=QAM256
            esac

            case ${tuninginfo[6]} in
                0) TRANSMISSION="2k";;          #0=2k
                1) TRANSMISSION="8k";;          #1=8k
                2) TRANSMISSION="AUTO";;        #2=Auto
                3) TRANSMISSION="4k";;          #3=4k
                4) TRANSMISSION="1k";;          #4=1k
                5) TRANSMISSION="16k";;         #5=16k
                6) TRANSMISSION="32k";;         #6=32k
            esac

            case ${tuninginfo[7]} in
                0) GUARD="1/32";;               #0=32
                1) GUARD="1/16";;               #1=16
                2) GUARD="1/8";;                #2=8
                3) GUARD="1/4";;                #3=4
                4) GUARD="AUTO";;               #4=Auto
                5) GUARD="1/128";;              #5=128
                6) GUARD="19/128";;             #6=19_128
                7) GUARD="19/256";;             #7=19_256
            esac

            case ${tuninginfo[8]} in
                0) HIERARCHY="NONE";;           #0=None
                1) HIERARCHY="1";;              #1=1
                2) HIERARCHY="2";;              #2=2
                3) HIERARCHY="4";;              #3=4
                4) HIERARCHY="AUTO";;           #4=Auto
            esac

            case ${tuninginfo[10]} in
             ""|0) SYSTEM="DVBT";;              #0=DVB-T
                1) SYSTEM="DVBT2";;             #1=DVB-T2
            esac

            SATPOS="DVB-T"
            FREQUENCY="${tuninginfo[1]}"
            SYMBOLRATE="27500000"
        ;;
        c)
            # DVB-C
            # 0     1           2           3           4           5   6
            # TYPE  FREQUENCY   SYMBOLRATE  INVERSION   MODULATION  FEC FLAGS
            # c     364000      6875000     2           3           15  0
            # c     372000      6875000     2           5           0   0
            # c     412000      6875000     2           5           0   d

            NETWORKTYPE="dvb_network_dvbc"
            POLARIZATION="NONE"
            
            case ${tuninginfo[4]} in
                0) MODULATION="AUTO";;          # 0=Auto
                1) MODULATION="QAM16";;         # 1=QAM16
                2) MODULATION="QAM32";;         # 2=QAM32
                3) MODULATION="QAM64";;         # 3=QAM64
                4) MODULATION="QAM128";;        # 4=QAM128
                5) MODULATION="QAM256";;        # 5=QAM256
            esac

            case ${tuninginfo[5]} in
                0) FEC="AUTO";;                 # 0=Auto
                1) FEC="1/2";;                  # 1=1/2
                2) FEC="2/3";;                  # 2=2/3
                3) FEC="3/4";;                  # 3=3/4
                4) FEC="5/6";;                  # 4=5/6
                5) FEC="7/8";;                  # 5=7/8
                6) FEC="8/9";;                  # 6=8/9
               10) FEC="6/7";;                  # 10=6/7
               15) FEC="NONE";;                 # 15=None
            esac    

            SYSTEM="DVBC_ANNEX_AC"
            SATPOS="DVB-C"
            FREQUENCY="${tuninginfo[1]}"
            SYMBOLRATE="${tuninginfo[2]}"
        ;;
    esac

    SID=$(printf "%d\n" "0x$hexSID")
    NID=$(printf "%d\n" "0x$hexNID")
    TID=$(printf "%d\n" "0x$hexTID")
    
    NETWORKDIR=$tempdir/tvh_channellist/input/dvb/networks/$(echo "$SATPOS" | md5sum | cut -f1 -d" ")
    MUXDIR=$NETWORKDIR/muxes/$(echo "$SATPOS$FREQUENCY$POLARIZATION" | md5sum | cut -f1 -d" ")
    SERVICESDIR=$MUXDIR/services

    if ! [ -d $SERVICESDIR ]; then
        mkdir -p $SERVICESDIR
    fi
    
    echo -e "{" > $NETWORKDIR/config
    echo -e "\t\"networkname\": \"$SATPOS\"," >> $NETWORKDIR/config
    echo -e "\t\"nid\": 0," >> $NETWORKDIR/config
    echo -e "\t\"autodiscovery\": true," >> $NETWORKDIR/config
    echo -e "\t\"skipinitscan\": false," >> $NETWORKDIR/config
    echo -e "\t\"class\": \"$NETWORKTYPE\"" >> $NETWORKDIR/config
    echo -e "}" >> $NETWORKDIR/config
    
    echo -e "{" > $MUXDIR/config
    echo -e "\t\"delsys\": \"$SYSTEM\"," >> $MUXDIR/config
    echo -e "\t\"frequency\": $FREQUENCY," >> $MUXDIR/config

    case ${tuninginfo[0]} in
        s)
            echo -e "\t\"symbolrate\": $SYMBOLRATE," >> $MUXDIR/config
            echo -e "\t\"polarisation\": \"$POLARIZATION\"," >> $MUXDIR/config
            echo -e "\t\"modulation\": \"$MODULATION\"," >> $MUXDIR/config
            echo -e "\t\"fec\": \"$FEC\"," >> $MUXDIR/config
            echo -e "\t\"rolloff\": \"$ROLLOFF\"," >> $MUXDIR/config
            echo -e "\t\"pilot\": \"$PILOT\"," >> $MUXDIR/config
        ;;
        t)
            echo -e "\t\"bandwidth\": $BANDWIDTH," >> $MUXDIR/config
            echo -e "\t\"constellation\": \"$MODULATION\"," >> $MUXDIR/config
            echo -e "\t\"transmission_mode\": \"$TRANSMISSION\"," >> $MUXDIR/config
            echo -e "\t\"guard_interval\": \"$GUARD\"," >> $MUXDIR/config
            echo -e "\t\"hierarchy\": \"$HIERARCHY\"," >> $MUXDIR/config
            echo -e "\t\"fec_hi\": \"$CODERATEHP\"," >> $MUXDIR/config
            echo -e "\t\"fec_lo\": \"$CODERATELP\"," >> $MUXDIR/config
        ;;
        c)
            echo -e "\t\"symbolrate\": $SYMBOLRATE," >> $MUXDIR/config
            echo -e "\t\"constellation\": \"$MODULATION\"," >> $MUXDIR/config
            echo -e "\t\"fec\": \"$FEC\"," >> $MUXDIR/config
        ;;
    esac

    echo -e "\t\"enabled\": true," >> $MUXDIR/config
    echo -e "\t\"onid\": $NID," >> $MUXDIR/config
    echo -e "\t\"tsid\": $TID," >> $MUXDIR/config
    echo -e "\t\"initscan\": false" >> $MUXDIR/config
    echo -e "}" >> $MUXDIR/config
    
    SERVICE=$SERVICESDIR/$(echo "$ORBITALREF$SID$NID$TID" | md5sum | cut -f1 -d" ")
    echo -e "{" > $SERVICE
    echo -e "\t\"sid\": $SID," >> $SERVICE
    echo -e "\t\"lcn\": 0," >> $SERVICE
    echo -e "\t\"svcname\": \"$CHANNELNAME\"," >> $SERVICE
    echo -e "\t\"provider\": \"$PROVIDERNAME\"," >> $SERVICE
    echo -e "\t\"dvb_servicetype\": $SERVICETYPE," >> $SERVICE
    echo -e "\t\"enabled\": true," >> $SERVICE
    echo -e "\t\"pcr\": 0," >> $SERVICE
    echo -e "\t\"stream\": [" >> $SERVICE
    echo -e "\t]" >> $SERVICE
    echo -e "}" >> $SERVICE

done

echo ""

################################################################################################################
### CONVERT GROUPS #############################################################################################
################################################################################################################


mkdir -p $tempdir/tvh_channellist/channel
mkdir -p $tempdir/tvh_channellist/channel/tag
mkdir -p $tempdir/tvh_channellist/channel/config

#gfname=$(echo 1 | md5sum | cut -f1 -d" ")
#echo "All Channels:$gfname" > $tempdir/tags

#echo $gfname
#tagfile=$tempdir/tvh_channellist/channel/tag/$gfname
#echo -e "{" > $tagfile
#echo -e "\t\"enabled\": true," >> $tagfile
#echo -e "\t\"internal\": false," >> $tagfile
#echo -e "\t\"titled_icon\": false," >> $tagfile
#echo -e "\t\"name\": \"All Channels\"," >> $tagfile
#echo -e "\t\"comment\": \"\"," >> $tagfile
#echo -e "\t\"icon\": \"\"," >> $tagfile
#echo -e "\t\"index\": 1" >> $tagfile
#echo -e "}" >> $tagfile


currentline=1
fname=""    
grep -h -o -e 'userbouquet.*tv' -e 'userbouquet.*radio' $e2settingsdir/bouquets.tv $e2settingsdir/bouquets.radio | while read filename ; do
    currentline=$((currentline+1))
    bouquet=$(echo "${filename##*.}" | tr [a-z] [A-Z])" - "$(sed -n "1{p;q}" $e2settingsdir/$filename | sed -e 's/#NAME //g' -e 's/:/ /' -e 's/;/ /' -e 's/^[ \t]*//' -e 's/[ \t]*$//')
    fname=$(echo $currentline | md5sum | cut -f1 -d" ")
    echo "$bouquet:$fname" >> $tempdir/tags

    tagfile=$tempdir/tvh_channellist/channel/tag/$fname
    echo -e "{" > $tagfile
    echo -e "\t\"enabled\": true," >> $tagfile
    echo -e "\t\"internal\": false," >> $tagfile
    echo -e "\t\"private\": false," >> $tagfile
    echo -e "\t\"titled_icon\": false," >> $tagfile
    echo -e "\t\"name\": \"$bouquet\"," >> $tagfile
    echo -e "\t\"comment\": \"\"," >> $tagfile
    echo -e "\t\"icon\": \"\"," >> $tagfile
    echo -e "\t\"index\": $currentline" >> $tagfile
    echo -e "}" >> $tagfile
done
#echo "i am heere"
#echo $currentline
mkdir -p $tempdir/tvh_channellist/channel

linescount=$(grep -h -o -e 'userbouquet.*tv' -e 'userbouquet.*radio' $e2settingsdir/bouquets.tv $e2settingsdir/bouquets.radio | wc -l)
currentline=0

grep -h -o -e 'userbouquet.*tv' -e 'userbouquet.*radio' $e2settingsdir/bouquets.tv $e2settingsdir/bouquets.radio | while read filename ; do
    currentline=$((currentline+1))
      
    echo -ne "Converting group: $currentline/$linescount"

    bouquet=$(echo "${filename##*.}" | tr [a-z] [A-Z])" - "$(sed -n "1{p;q}" $e2settingsdir/$filename | sed -e 's/#NAME //g' -e 's/:/ /' -e 's/;/ /' -e 's/^[ \t]*//' -e 's/[ \t]*$//')
    TAG=$(grep -h "$bouquet:" $tempdir/tags | sed "s;$bouquet:;;g")

    chmod 755 ./currentcounter.bash
    source ./currentcounter.bash
    grep -h -o '1:0:.*:.*:.*:.*:.*:0:0:0:' $e2settingsdir/$filename | tr [A-Z] [a-z] | while read line ; do
        cnumber=$((cnumber+1))  
        echo $cnumber
        serviceref=(${line//:/ })
        SID=$(printf "%d\n" "0x${serviceref[3]}")
        NID=$(printf "%d\n" "0x${serviceref[5]}")
        TID=$(printf "%d\n" "0x${serviceref[4]}")
        ORBITALREF="${serviceref[6]}"
        serviceID=$(echo "$ORBITALREF$SID$NID$TID" | md5sum | cut -f1 -d" ")
        channel=$tempdir/tvh_channellist/channel/config/$(echo "$serviceID" | md5sum | cut -f1 -d" ")
        
        picon=$(echo "${serviceref[0]}_${serviceref[1]}_${serviceref[2]}_${serviceref[3]}_${serviceref[4]}_${serviceref[5]}_${serviceref[6]}_${serviceref[7]}_${serviceref[8]}_${serviceref[9]}" | tr [a-z] [A-Z])
        if [ -f "$picondir/$picon.png" ]; then
            picon="$piconurl/$picon.png"
        else
            picon=""
        fi
        
        if [ -f $channel ]; then
            echo -e "\t\t\"$TAG\"," >> $channel
        else
            echo -e "{" > $channel
            echo -e "\t\"number\": $cnumber," >> $channel
            echo -e "\t\"enabled\": true," >> $channel            
            echo -e "\t\"epgauto\": true," >> $channel
            echo -e "\t\"dvr_pre_time\": 0," >> $channel            
            echo -e "\t\"icon\": \"$picon\"," >> $channel
            echo -e "\t\"dvr_pre_time\": 0," >> $channel
            echo -e "\t\"dvr_pst_time\": 0," >> $channel
            echo -e "\t\"services\": [" >> $channel
            echo -e "\t\t\"$serviceID\"" >> $channel
            echo -e "\t]," >> $channel
            echo -e "\t\"tags\": [" >> $channel
            echo -e "\t\t\"$TAG\"," >> $channel
        fi
    echo "cnumber=$cnumber" > ./currentcounter.bash
    done
    
done

for file in $tempdir/tvh_channellist/channel/config/* ; do
    echo -e "\t\t\"$gfname\"" >> $file
    echo -e "\t]" >> $file
    echo -e "}" >> $file
done

################################################################################################################
### OUTPUT FILES ###############################################################################################
################################################################################################################

rm -rf $outputdir/tvh_channellist
cp -R $tempdir/tvh_channellist $outputdir/tvh_channellist

################################################################################################################
### CLEANUP ####################################################################################################
################################################################################################################

rm -rf $tempdir

echo ""
echo "Done!"

**mach1** · 02-05-2016, 16:35

pcz

Hi Guys.

I just want to let you know, how the progress going...
So, finally I managed tvheadend pvr addon to work with Kodi v16. I still need to done a few test, But soon I'll release a beta (ipk package) version with Kodi v16.
With this update the "OK" button with CEC will be sorted as well!
Tvheadend 4.2 are also working, but there are nothing why we use it now, and I think 4.0.8 is more stable...

**BiNARY** · 02-05-2016, 17:24

Birazda OpenSPA takılayım diyordum eklenti olarak verecekler ise bekleriz artık. En iyisi boş bir karta yazmak olacak. Bilgi için teşekkürler.

İyi çalışmalar...

Duyuru

TVHeadend Module + OSCam in E2 Mnigma at WeTeK

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap

Yorum yap