Rudream 5.0 Image Vu+ Solo 4K

[mach1]

https://yadi.sk/d/OaAMikxGf6yhG

[mamoste1]

beta imaje. renga reng,stili farklı,fakat daha tam düzenlenmemiş. gstream eklenmemiş.uhd kanallar radyo olarak görüntüsüz geliyor. hdmı 2160 girişi yok.kısacası şimdi kullanılacak durumda değil.

[mach1]

Test bilgi için sağol..

[mach1]

16-12-2015

rudream-4




https://yadi.sk/d/OaAMikxGf6yhG

[mach1]

rudream-5
OE_5_Live_X_BETA

We present a new version of the Live X firmware! Now in Beta status!

This firmware build from scratch and based on the new OpenEmbedded version, which included the upgrade to newer versions of more than 300 packages and libraries. The main changes obtained in the firmware:


�Upgrading more than 300 packages and libraries.

�Updated DVBMediaSink library which docks enigma2 with GStreamer 1.6.2 multimedia framework (thanks christophecvr) and updated version of a media framework GStreamer to 1.6.2.

�From firmware by default removed all SMB, ATF, and NFS protocols clients / servers. To use them, you need to install the appropriate packages using the "Packages and extensions manager".

�Updated version of the Samba Server to 4.1. This is a new package that file is able to serve all supported by Microsoft Windows-version clients, including Windows 8. The new Samba Server 4.1 now supports protocols SMB3, SMB2, SMB2.1, SMB and CIFS. This package no longer includes a built-in utility mount.cifs to mount network drives, for this purpose, added a new separate package cifs-utilites, using bibiloteki package Samba Server, and firmware plugin Networkbrowser, but for user configuration and connection management of network resources It remained unchanged!



ATTENTION!

Unfortunately, these packages take up considerable disk space (~ 7 Mb), which requires careful consideration when installing them, especially in boxes with limited internal memory.

�Removed packages CDFs, as it is no longer required (GStreamer), and adding native support in enigma2.

â�–To avoid confusion, which option to use the user-agent header, and that would allow you to set different user agent header for each service, it is now permitted to install it only in reference to the way the line, details can be found on the forum OpenPLi ®.

�Fixed ON/OFF bug of transmission service using the setup menu of the Transmission plugin.

�Fixed bug leading to crashes during loading VU + SOLO4K .

�Other changes and additions to enhance stability and performance.



ATTENTION!

To install the update, you must make a backup of the firmware and save the settings, and then install the firmware from scratch. After installing the firmware, restore settings without packages restore, that will have to be installed then using the "Packages and extensions manager " If after the recovery options you have crash of enigma2 GUI, do not use the restore settings option. All firmware for testing can be found here.


NOTICE!

ExtInfoBar plugin does not work on the current firmware, do not install or use this plugin, until it will be adapted!




release 31.12.2015

[mach1]

VU+ rudream-5
04/01/2016
OE_5_Live_X_BETA


We present a updated version of the Live X firmware! Now in Beta status!

This firmware build from scratch and based on the new OpenEmbedded version.The main changes obtained in the firmware:


�Updated OpenEmbedded (which requires the installation of the firmware from scratch)..

�Changed dependence of Samba package from Perl, so there is no need to use it for the operation of Samba Server, which allows you to save space in the flash memory.

�Updated plugin BackupSuite and added his support to mtd-utils, now the plugin works without error, please note that backups firmware with a large size can not be done by some boxes loader (the reason is not clear), in this case, to restore the firmware you can install firmware from scratch, and then use the built-in restory function in the BackupSuite plugin.

�Updated FullBackup plugin, the main difference in the new version - Support for all models of boxes, including DreamBox (thanks Dima73).



�Other changes and additions to enhance stability and performance.



ATTENTION!



To install the update, you must make a backup of the firmware and save the settings, and then install the firmware from scratch. After installing the firmware, restore settings without packages restore, that will have to be installed then using the "Packages and extensions manager " If after the recovery options you have crash of enigma2 GUI, do not use the restore settings option. All firmware for testing can be found here.


NOTICE!

ExtInfoBar plugin does not work on the current firmware, do not install or use this plugin, until it will be adapted!

https://yadi.sk/d/I4i6yYG4mKfWF

[mamoste1]

bu imajın görüntüsü super olmuş.ts panel ve diğer ipk leri kabul etmıyor. her açılışta media ayarları,disk kurma penceresı açılıyor,eklentiler çalışmıyor. ancak görüntü super olmuş.

[mach1]

Paralı süreli olması sıkıntı işte..

[mach1]

New -rudream-5.0



rudream-Live-X3.0_CAM.zip

rudream-5.0 vusolo4k http://speedy.sh/kZ7fr/solo4k.rar

[mach1]

rudream-5 22-02-2016

Link OK
rudream-Live-X3.0_CAM.zip






rudream-4.0 vusolo4K https://yadi.sk/d/I4i6yYG4mKfWF

[mamoste1]

bu imajın tam sürümü piyasada solo nun diğer markalarına dağıtıldı. rus sitelerde online bağlantısı kesilerek,kısıtlamanın kaldırıldığı versiyonları varmış?

[mach1]

https://docviewer.yandex.com/?url=ya...c=575f0a1d7ffa

[mach1]

Update

23-06-2016

https://docviewer.yandex.com/?url=ya-disk-public%3A%2F%2FTPbvhZnFLnB2yAX4OzF%2FrLUxIOfUvtJi%2FPyS%2FWd%2BqSQ%3D%3A%2FOE_5_Live_XS%2Frudream-5-vusolo4k_usb.zip&name=rudream-5-vusolo4k_usb.zip&c=576ce51cfb81

[mach1]

Update :: 12-08-2016

https://docviewer.yandex.com/?url=ya-disk-public%3A%2F%2FTPbvhZnFLnB2yAX4OzF%2FrLUxIOfUvtJi%2FPyS%2FWd%2BqSQ%3D%3A%2FOE_5_Live_XS%2Frudream-5-vusolo4k_usb.zip&name=rudream-5-vusolo4k_usb.zip&c=57b050772c41

[mach1]

https://docviewer.yandex.com/?url=ya...c=58639bec91b1